-
Forward centrifugal fans
Forward centrifugal fans have a blade exit angle of more than 90°. When working, the impeller rotates at high speed to generate centrifugal force, which throws the air from the center to the edge, and discharges it through the pressurization of the worm casing, and at the same time, negative pressure is formed inside the impeller to continuously absorb the air. Widely used in ventilation and air conditioning, industrial gas transportation, dust removal and equipment supporting and other fields, especially in the high-pressure, small air volume scenarios with outstanding advantages, can meet the needs of multi-industry gas treatment.
Backward centrifugal fans
Backward centrifugal fan in the work, the airflow from the fan axial into the blade space, and then driven by the impeller on the one hand with the impeller rotation; on the other hand in the role of inertia to improve the energy, along the radius of the direction of the impeller to leave the fan, relying on the centrifugal force generated to do the work of the fan is called centrifugal fan.
Axial Fans
Axial fan is a kind of ventilation equipment which conveys gas through axial flow, and its core impeller is composed of hub and twisted blades. When working, the motor drives the impeller to rotate, and the blades push the gas to flow along the axial direction (parallel to the direction of the rotating axis), and the gas flows directly from the inlet end to the outlet end of the fan, and the flow direction is basically unchanged, which is similar to the principle of propeller propulsion.
Duct Fans
Duct fan is a ventilation equipment designed for installation in ducts, which is composed of core components such as motor, impeller and casing. Through the centrifugal force or axial thrust generated by the rotating impeller, the air is sucked in and transported directionally along the pipeline to realize the efficient ventilation, air exchange or air conditioning function in the confined space.
Pump
Pump is a mechanical energy through mechanical energy will fluid energy (kinetic or potential energy) to enhance the mechanical device, the use of impeller rotation, piston reciprocation and other principles to change the pump volume or produce centrifugal force, drive the fluid flow, to achieve the transmission, pressurization or circulation function. According to the working principle can be divided into volumetric pumps (such as piston pumps) and vane pumps (such as centrifugal pumps) and other types.
-
Industry
IT communication
Provides customized fans around the cooling pain points of IT equipment and communication base stations. Ensure that servers, base stations and other equipment in the high-intensity operation of effective heat dissipation, to maintain a stable working condition, to ensure smooth data processing and communication transmission.
Power Electronics
According to the heat dissipation of power electronic equipment and operating environment requirements, to create a professional fan. Help equipment in complex working conditions, effective heat dissipation, stable operation, to protect the reliable operation of the power system and power conversion efficiency.
Air Conditioning & Heat Pumps
Customized fans for air conditioning and heat pump systems help achieve energy-efficient temperature regulation by optimizing air circulation and heat exchange efficiency, improving cooling and heating effects, and are widely used in domestic and commercial scenarios.
Vehicle And Ship
Focusing on the internal environment of vehicles and boats and the operational requirements of equipment, the development of exclusive fans. It is used to ventilate and regulate the temperature inside the vehicle and ship, and at the same time to meet the heat dissipation requirements of the engine and electrical equipment, so as to improve the traveling experience and equipment reliability.
Well Ventilated
Focusing on the air circulation needs of various types of space, we create ventilation solutions for buildings, factories and other places, utilizing fans to realize fresh air replenishment and dirty air discharge, creating a healthy and comfortable air environment.
Home Appliances
For the characteristics of home appliances, we develop adapted fans. For example, they are used for temperature regulation of air conditioners and purification of air purifiers, providing key support for home appliances to realize high efficiency performance and improve the quality of life of users.
Cold Chain
Provide fan solutions for the cold chain industry's requirements for precise temperature control and uniform air distribution. Applied to cold storage, refrigerated trucks and other cold chain equipment, it ensures a stable low-temperature environment and safeguards the quality of fresh and pharmaceutical products.
-
About Us
-
-
Air Circulation Fan for Electronics Cooling: Key Specifications of the AG710F5-AGT-00
Release time:
2026-10-15
Customized air circulation fan for electronics cooling China, offering tailored airflow solutions for reliable thermal management
Product Overview
An air circulation fan for electronics cooling helps manage airflow within equipment where temperature control is an important part of reliable operation. Selecting a suitable fan requires attention to more than airflow alone. Material, protection level, insulation class, operating temperature, and thermal safeguards are also relevant when matching a component to its intended working environment.
The AG710F5-AGT-00 is an air circulation fan specified with a plastic construction, IP54 protection, Class F insulation, and a working temperature range of -25℃ to +60℃. It also features recoverable thermal protection. These characteristics provide equipment manufacturers and component buyers with several important reference points when evaluating the fan for electronics cooling and related airflow requirements.
Plastic Construction for Equipment Integration
Material selection influences how a fan can be integrated into an electrical or electronic assembly. The AG710F5-AGT-00 uses plastic as its specified material, providing a clear reference for designers reviewing component construction and compatibility with the surrounding equipment.
For manufacturers, the material of an airflow component should be considered alongside installation requirements, operating conditions, and the structure of the complete assembly. The fan must fit the intended application, and its construction should be assessed against the mechanical and environmental demands of the equipment.
When evaluating the AG710F5-AGT-00, buyers can use its plastic material specification as part of the initial component selection process. Other material properties, such as specific chemical resistance, flame-retardant classification, or mechanical strength, should be confirmed separately if they are required for a particular project.
Understanding the IP54 Protection Level
The AG710F5-AGT-00 has an IP54 protection rating. This designation describes protection against dust and water under specified test conditions.
The first digit, 5, indicates that the enclosure is dust-protected, meaning dust ingress is not completely prevented but must not occur in a quantity that interferes with satisfactory operation. The second digit, 4, indicates protection against splashing water from any direction under the applicable test conditions.
For electronics manufacturers, this rating is a useful consideration when choosing components for equipment exposed to dust or occasional water splashes. However, IP54 should not be interpreted as a guarantee of complete dust-tightness or protection against water jets, immersion, or every possible environmental hazard.
The rating also needs to be considered in the context of the finished product. Installation methods, surrounding enclosures, cable openings, and other structural details can influence the protection achieved by the complete assembly. Buyers should therefore confirm how the fan's stated protection level applies to their intended installation.
Class F Insulation and Electrical Design Considerations
Insulation is another important factor when selecting a fan for electrical equipment. The AG710F5-AGT-00 is specified with Class F insulation, providing a defined insulation classification for engineering assessment.
For equipment designers, insulation class is relevant when reviewing the thermal and electrical requirements of a component. It should be considered together with the fan's actual operating conditions, electrical characteristics, and the requirements of the complete system.
The Class F designation alone does not establish the fan's rated voltage, power consumption, current, motor type, or service life. These details should be obtained from the manufacturer's technical documentation when preparing a product specification or comparing alternative components.
By reviewing insulation requirements early in the design process, procurement teams can narrow their selection to components whose documented characteristics align with the intended equipment configuration.
Working Temperature Range: -25℃ to +60℃
The AG710F5-AGT-00 has a specified working temperature range of -25℃ to +60℃. This range is a key parameter for determining whether the fan is suitable for the thermal conditions expected during operation.
Electronic assemblies can experience different temperatures depending on their internal heat generation, installation location, ventilation arrangement, and surrounding environment. A fan selected for these applications must be evaluated against the temperature conditions it is expected to encounter.
The lower limit of -25℃ and upper limit of +60℃ provide a practical reference for the initial screening of potential applications. Equipment manufacturers should compare these limits with the anticipated operating environment rather than relying only on the average temperature.
It is also important to distinguish the stated working temperature range from other temperature ratings. The supplied specifications do not establish separate storage temperatures, humidity limits, or performance characteristics at individual temperatures. Where these factors matter, further manufacturer confirmation is necessary.
Recoverable Thermal Protection
Thermal protection is an important consideration for components operating within electrical equipment. The AG710F5-AGT-00 is equipped with recoverable thermal protection, a safeguard intended to address excessive temperature conditions.
A recoverable thermal protection mechanism can interrupt operation when a specified thermal condition is reached and permit recovery after the relevant condition has cleared, depending on the protection design. This differs from treating a thermal safeguard as a permanent, one-time shutdown device.
For equipment manufacturers, this feature is relevant when reviewing component protection and system-level operating procedures. The specific activation temperature, reset behavior, and recovery conditions for the AG710F5-AGT-00 are not included in the supplied product information and should be confirmed with the manufacturer.
Thermal protection should also be viewed as one element of a broader equipment safety strategy. Appropriate electrical design, ventilation, installation, and operating controls remain important for the complete system.
Selecting the Fan for an Electronics Cooling Project
When assessing the AG710F5-AGT-00 for an electronics cooling project, buyers should compare its documented features with the application's technical requirements.
The plastic material, IP54 protection level, Class F insulation, -25℃ to +60℃ working temperature range, and recoverable thermal protection provide a starting point for this evaluation. However, a complete selection decision also requires information about airflow performance, static pressure, dimensions, mounting arrangements, voltage, current, power consumption, noise, and connection details where relevant.
These additional parameters have not been provided in the current product information and should not be assumed. Requesting the applicable datasheet can help engineering and procurement teams determine whether the fan meets the requirements of a specific enclosure or cooling system.
It is equally important to evaluate the installation as a whole. Airflow paths, obstructions, heat-producing components, and available ventilation openings can all affect the effectiveness of an electronics cooling arrangement. A fan's suitability therefore depends on the relationship between its verified performance and the design of the equipment in which it will operate.
Conclusion
The AG710F5-AGT-00 combines a plastic construction with IP54 protection, Class F insulation, a working temperature range of -25℃ to +60℃, and recoverable thermal protection. These specifications give equipment manufacturers a useful basis for preliminary evaluation when selecting an airflow component for electronics cooling.
For buyers comparing an air circulation fan for electronics cooling, the next step is to verify the remaining electrical, mechanical, and airflow parameters against the intended application. Reviewing the complete technical documentation helps ensure that the selected component is compatible with the equipment design and its expected operating conditions.
Message
Email：
market@fans-tech.com (Domestic business)
sales@fans-tech.com (Overseas business)
Address：
No.9. Shuncheng Road, Wusha, Daliang Shunde, Foshan, Guangdong, China